Installation on macOS Table of Contents. Using Packages; Using the bundled PHP; Compiling PHP on macOS; This section contains notes and hints specific to installing PHP on macOS. PHP is bundled with Macs, and compiling is similar to the Unix installation guide. Okay, I figured out that everytime I booted onto my Mac OS 10.12.5 (I setup a dual boot system on 10.12.5 and 10.13 on 2 seperated SSD ) then restart, the computer then boot into Mac OS 10.13 just fine and works great. But if I try to boot into 10.13 from a fresh start, the computer just crash on booting screen. Configure PHP for your Moodle installation Mac OS X 10.6 Server - No PHP installation needed. The Mac OS X 10.6.5 Server (SnowLeopard) comes with PHP 5.3.3 and a lot of PHP extensions. This would be the best choice for Moodle 1.9.x and for Moodle 2.0 on a Mac OS X Server. Please forget everything you read about the missing GD Library! To explore the macOS User Guide, click Table of Contents at the top of the page, or enter a word or phrase in the search field. If you need more help, visit the macOS Support website. MacOS User Guide.
Article ID = 114Article Title = Virtualising Mac OS X 10.6 Snow Leopard (Server)
Article Author(s) = Graham Needham (BH)
Article Created On = 3rd February 2014
Article Last Updated = 27th March 2019
Article URL = https://www.macstrategy.com/article.php?114
Article Brief Description:
Instructions for installing, setting up and virtualising Mac OS X 10.6 Snow Leopard (Server) on a modern Mac so you can use Rosetta (PowerPC) based applications.
Virtualising Mac OS X 10.6 Snow Leopard Server/Rosetta
The ability to virtualise Mac OS X 10.6 Snow Leopard is important and very useful as it is the only way to use Rosetta(PowerPC) based applications on a modern Macintosh computer. MacStrategy presents a special guide to doing just this. You mustvirtualise Mac OS X 10.6 Snow Leopard Server and not the client version. This is a legal requirement by Apple.You are legally allowed to virtualise the server version but not the normal, client version.This article deals with setting up/installing a virtual machine with Mac OS X 10.6 clean/from scratch. If you would like to transfer an existing Mac running Mac OS X 10.6 to a virtual machine, or take a Mac OS X 10.6 bootable storage device/clone/disk image and convert it into a virtual machine please see this article instead.
Virtualisation Software
- Parallels Desktop [£69.99 inc VAT - 14 day free trial available]
- VMWare Fusion [£70.00 inc VAT - 30 day free trial available]
- Oracle VirtualBox [FREE - Open source under GNU General Public License (GPL) version 2]
Instructions
Some people have reported that if you have a very modern Macintosh computer (one released well after Mac OS X 10.6 existed) it is not easy/possible to install to Mac OS X 10.6 Snow Leopard Server in a virtual environment. We're looking into that and will update this article with more information when we have it. We'll test with other Macs as and when we can and update this article accordingly. For this article we have tested using the following Macs:- MacBook Pro 15' (Early 2011 model - MacBookPro8,2) [released after 10.6.3]
- Mac mini (Late 2012 model - Macmini6,2) [released after 10.6.3]
Preparation
NOTE: You will need a Mac with a physical, optical drive to create an ISO disk image of the Mac OS X 10.6 Server install DVD. This does not need to be the Mac you ultimately install the virtual machine on, you just need a Mac with an optical drive to create the ISO disk image of the Mac OS X 10.6 Server install DVD in the first place.- Obtain your preferred virtualisation software (see list above)
- Obtain the Mac OS X 10.6 Server install disc:
- If you don't have one, it is available by calling the Apple Store (in the UK 0800 048 0408) - you cannot buy it via the Apple online store
- You need part number 'MC588Z/A' which is specifically 'Mac OS X 10.6.3 Snow Leopard Server Unlimited Clients Single Licence International' (£14.00 inc VAT in the UK) - not the normal client edition (part number MC573Z/A)
- Create an ISO disk image of the Mac OS X 10.6 Server install DVD:
- Go to Macintosh HD > Applications > Utilities > Disk Utility
- Insert your Mac OS X 10.6 Server install DVD
- In Disk Utility, in the top left, click on the icon for the optical drive not the indented line for the disc volume
- Go to File menu > New > Disk Image from device name, where device name is the OS name of your optical drive e.g. disk1
- In the save dialogue box enter a suitable filename e.g. 'Mac OS X Server 10.6.3 ISO.dmg'. Leave Image Format with the default setting of compressed.
- Wait for the image to be created and then eject the original DVD
- Archive/backup the 'Mac OS X Server 10.6.3 ISO.dmg' disc image that you just created
- Purchase/install/update your preferred virtualisation software
- Make sure you have plenty of free hard disk space (a basic 10.6 Server install is about ~8.5GB before your own applications and you'll need at least twice that if you need to clone it for multiple installations), so we recommend at least 25GB of free space
- Make sure your actual, physical Mac has a working internet connection e.g. use a web browser to go to https://www.apple.com and see if you can view a web page
- Create a dedicated folder to share files/documents with the virtual environment e.g. in your Documents folder create a folder titled '106SharedFolder'
Parallels Desktop v9 (or later) Instructions
- Open Parallels
- Go to File menu > New
- Click on 'Install Windows or another OS from a DVD or image file' and click Continue
- Click on 'Image File'
- Drag your Mac OS X 10.6 Server install DVD ISO image file to the area in the window
- Click Continue to begin installing Mac OS X
- Name your virtual machine e.g. 'Mac OS X 10.6 Server'
- Tick the 'Customize settings before installation' option
- Choose your required custom settings. We recommend:
- General > CPUs and Memory e.g. 2 CPUs and 4GB RAM)
- Options > Sharing - for best security set 'Share Folders' to 'None', untick 'SmartMount' 'Map mac volumes to virtual Machine and click 'Custom Folders…' and add your dedicated shared folder e.g. in your Documents > '106SharedFolder' (as per the preparation section above)
- Hardware > Video > Video memory - the more memory assigned the higher the resolution available for the virtual environment
- Hardware > Network 1 > Type > Bridged Network: 'Built-in Ethernet' - the virtual environment will use your physical Mac's Ethernet network configuration
- Security > Time Machine > Do not back up virtual machine
- Close settings window and click 'Continue'
- The virtual machine will reboot to the OS X Server install disc (Apple logo + whirling wheel underneath)
- Follow the on screen instructions
- At the Install Mac OS X Server screen, click 'Customize…' in the bottom left and select custom options as required, specifically tick 'Rosetta' and 'QuickTime 7'. Only tick 'Langauge Translations' or 'X11' if you specifically need them otherwise you are just wasting space. No need to tick 'Printer Support' as it's a virtual environment and if drivers are needed OS X will automatically download and install the latest driver versions as required.
- After the installation completes and the virtual machine reboots please be patient, especially with any black screens - everything is slightly slower in a virtual environment
- At the Welcome screen follow the on screen instructions NOTE: If 10.6 Server needs to be installed on multiple Macs using different serial numbers that you have no control over make a copy or clone of the virtual machine before entering the serial number:
- In Parallels 'Shut down' the virtual machine and choose shut down again to force the Mac to shut down if necessary
- In the Finder go to the Parallels virtual machine folder (usually Macintosh HD > Users >your home directory > Documents > Parallels)
- Copy/duplicate/archive the Mac OS X 10.6 Server virtual machine file (pvm)
- Copy this file to the same place on additional Macs with Parallels as required (usually Macintosh HD > Users >your home directory > Documents > Parallels)
- In Parallels go to Window menu > Virtual Machines List
- Select the Mac OS X 10.6 Server virtual machine (don't open it or start it)
- Go to File menu > Clone and make a clone of the virtual machine
- Copy the clone to additional Macs with Parallels as required
- Start up the Mac OS X 10.6 Server virtual machine again and complete the initial installation (and enter your serial number)
- Set up as a new server
- If you don't want to register at the registration page click inside the virtual machine and window and press (Apple+q) then click the 'Skip' button
- At the Administrator Account screen untick 'Enable administrators to log in remotely using SSH' and 'Enable administrators to manage this server remotely' and create an admin account
- At the Network screen select Ethernet on the left and on the right set 'Configure IPv4' to 'Using DHCP'
- At the Network Names screen set 'Primary DNS Name' to 'my106server.private' and 'Computer Name' to 'my106server' (use different, identifiable names if you are installing on multiple Macs e.g. 106server01.private / 106server01, then 106server02.private / 106server02, and so on… - these can be changed later if required)
- At the Users and Groups screen choose 'Configure Manually'
- At the Connect to a Directory Server screen untick 'Connect to a Directory Server'
- At the Directory Services screen untick 'Set up an Open Directory master'
- Click 'Setup' and Mac OS X Server will configure itself
- Now the Finder will appear and the Server Admin application will open NOTE: Under Settings >
- General tab you can change the serial number
- Network tab you can change the Computer Name and/or Local Hostname
- Quit Server Admin
- Unmount the 'Mac OS X Server Install Disc'
- Go to Virtual Machine menu > Install Parallels Tools…
- Install Parallels Tools, following the on screen instructions and restart the virtual machine when complete
- Set the screen resolution as required
- Set your Finder > Preferences
- Move or delete the 'Mac OS X Server Next Steps.pdf' from the Desktop - you do not need to do any of this.
- To avoid confusion rename the hard disk from Macintosh HD to something that is different to your current hard disk e.g. '106 Server HD'
- Remove unneeded server administration tools icons from the Dock
- Go to Apple menu > Software Update and install all available updates (there will be quite a lot of updates and the 10.6.8 server update is over 1GB in size so they could take some time to download/install)
- Keep going to Apple menu > Software Update and installing all available updates until there are no more updates to install NOTE: If you are going to install 10.6 Server on multiple Macs and you have control over the serial numbers you can now make a copy or clone of the virtual machine and simply change the serial number on each installation:
- In Parallels 'Shut down' the virtual machine and choose shut down again to force the Mac to shut down if necessary
- In the Finder go to the Parallels virtual machine folder (usually Macintosh HD > Users >your home directory > Documents > Parallels)
- Copy/duplicate/archive the Mac OS X 10.6 Server virtual machine file (pvm)
- Copy this file to the same place on additional Macs with Parallels as required (usually Macintosh HD > Users >your home directory > Documents > Parallels) NOTE: On the Mac with a new installation, open Server Admin and go to Settings > General tab to change the serial number
- In Parallels go to Window menu > Virtual Machines List
- Select the Mac OS X 10.6 Server virtual machine (don't open it or start it)
- Go to File menu > Clone and make a clone of the virtual machine
- Copy the clone to additional Macs with Parallels as required NOTE: On the Mac with a new installation, open Server Admin and go to Settings > General tab to change the serial number
- Install your required Rosetta/PowerPC/10.6 compatible software
- Check the Mac OS X 10.6 Server Notes NOTE: You cannot drag and drop between the Mac OS X virtual environment and your normal Mac/primary OS but you can configure the Virtual Machine to have a shared folder with your primary OS though - go to Parallels, Virtual Machine menu > Configure… > Options > Sharing - for best security set 'Share Folders' to 'None', untick 'SmartMount' 'Map mac volumes to virtual Machine and click 'Custom Folders…' and add shared folder(s) as required e.g. use the dedicated Documents > '106SharedFolder' folder in your primary OS as per the preparation section above
VMWare Fusion
- Open VMWare Fusion
- Go to File menu > New
- At the 'Select the Installation Method' screen click on 'Install from disc or image' and click Continue
- Drag your Mac OS X 10.6 Server install DVD ISO image file to the area in the window and click Continue
- At the 'Choose Operating System' screen select Apple Mac OS X > Mac OS X Server 10.6 Mac OS X Server 10.6'/>
- At the 'Virtual Machine Summary' click 'Customize Settings'
- Name your virtual machine e.g. 'Mac OS X 10.6 Server'
- Choose your required custom settings
- We recommend:
- Processors & Memory > CPUs and Memory e.g. 2 CPUs and 4GB/4096MB RAM)
- Hard Disk (SATA) > virtual machine drive size of 64GB
- Close the settings window and click 'Finish'
- Click the start button/triangle in the middle of the screen to begin installing Mac OS X
- The virtual machine will reboot to the OS X Server install disc (Apple logo + whirling wheel underneath)
- Follow the on screen instructions
- At the Install Mac OS X Server screen, click 'Customize…' in the bottom left and select custom options as required, specifically tick 'Rosetta' and 'QuickTime 7'. Only tick 'Langauge Translations' or 'X11' if you specifically need them otherwise you are just wasting space. No need to tick 'Printer Support' as it's a virtual environment and if drivers are needed OS X will automatically download and install the latest driver versions as required.
- After the installation completes and the virtual machine reboots please be patient, especially with any black screens - everything is slightly slower in a virtual environment
- At the Welcome screen follow the on screen instructions NOTE: If 10.6 Server needs to be installed on multiple Macs using different serial numbers that you have no control over make a copy or clone of the virtual machine before entering the serial number:
- Go to Virtual Machine menu > Shut down and click the 'Shut Down' button
- Quit VMWare Fusion
- In the Finder go to the Fusion virtual machine folder (usually Macintosh HD > Users >your home directory > Documents > Virtual Machines)
- Copy/duplicate/archive the Mac OS X 10.6 Server virtual machine file (pvm)
- Copy this file to the same place on additional Macs with Fusion as required (usually Macintosh HD > Users >your home directory > Documents > Virtual Machines)
- If you have Fusion 'Professional', in Fusion select the Mac OS X 10.6 Server virtual machine from the Virtual Machine Library (you cannot create clones using the standard version of Fusion - use the copy method above instead)
- Click Virtual Machine and select 'Create Full Clone'
- Type a name for the clone e.g. 'Mac OS X 10.6 Server Clone' and click Save to make a clone of the virtual machine
- The clone file is created in the Fusion Virtual Machines folder (usually Macintosh HD > Users >your home directory > Documents > Virtual Machines)
- Copy the clone to additional Macs with Fusion as required
- Start up the Mac OS X 10.6 Server virtual machine again and complete the initial installation (and enter your serial number)
- Set up as a new server
- If you don't want to register at the registration page click inside the virtual machine and window and press (Apple+q) then click the 'Skip' button
- At the Administrator Account screen untick 'Enable administrators to log in remotely using SSH' and 'Enable administrators to manage this server remotely' and create an admin account
- At the Network screen select Ethernet on the left and on the right set 'Configure IPv4' to 'Using DHCP'
- At the Network Names screen set 'Primary DNS Name' to 'my106server.private' and 'Computer Name' to 'my106server' (use different, identifiable names if you are installing on multiple Macs e.g. 106server01.private / 106server01, then 106server02.private / 106server02, and so on… - these can be changed later if required)
- At the Users and Groups screen choose 'Configure Manually'
- At the Connect to a Directory Server screen untick 'Connect to a Directory Server'
- At the Directory Services screen untick 'Set up an Open Directory master'
- Click 'Setup' and Mac OS X Server will configure itself
- Now the Finder will appear and the Server Admin application will open NOTE: Under Settings >
- General tab you can change the serial number
- Network tab you can change the Computer Name and/or Local Hostname
- Quit Server Admin
- Unmount the 'Mac OS X Server Install Disc'
- Go to Virtual Machine menu > Settings…
- Click on Network Adapter, make sure it is switched on then select 'Autodetect' under 'Bridged Networking'
- Close Settings window
- In your virtual Mac go to Apple menu > Location > Network Preferences
- Enter the same numbers for 'DNS Server:' as those on your actual Mac (Apple menu > Location > Network Preferences in your non-virtual, actual OS that is running)
- In your virtual Mac close Network Preferences
- Go to Virtual Machine menu > Update VMWare Tools
- Install VMWare Tools, following the on screen instructions and restart the virtual machine when complete
- Set the screen resolution as required
- Set your Finder > Preferences
- Move or delete the 'Mac OS X Server Next Steps.pdf' from the Desktop - you do not need to do any of this.
- To avoid confusion rename the hard disk from Macintosh HD to something that is different to your current hard disk e.g. '106 Server HD'
- Remove unneeded server administration tools icons from the Dock
- Go to Apple menu > Software Update and install all available updates (there will be quite a lot of updates and the 10.6.8 server update is over 1GB in size so they could take some time to download/install)
- Keep going to Apple menu > Software Update and installing all available updates until there are no more updates to install NOTE: If you are going to install 10.6 Server on multiple Macs and you have control over the serial numbers you can now make a copy or clone of the virtual machine and simply change the serial number on each installation:
- Go to Virtual Machine menu > Shut down and click the 'Shut Down' button
- Quit VMWare Fusion
- In the Finder go to the Fusion virtual machine folder (usually Macintosh HD > Users >your home directory > Documents > Virtual Machines)
- Copy/duplicate/archive the Mac OS X 10.6 Server virtual machine file (pvm)
- Copy this file to the same place on additional Macs with Fusion as required (usually Macintosh HD > Users >your home directory > Documents > Virtual Machines) NOTE: On the Mac with a new installation, open Server Admin and go to Settings > General tab to change the serial number
- If you have Fusion 'Professional', in Fusion select the Mac OS X 10.6 Server virtual machine from the Virtual Machine Library (you cannot create clones using the standard version of Fusion - use the copy method above instead)
- Click Virtual Machine and select 'Create Full Clone'
- Type a name for the clone e.g. 'Mac OS X 10.6 Server Clone' and click Save to make a clone of the virtual machine
- The clone file is created in the Fusion Virtual Machines folder (usually Macintosh HD > Users >your home directory > Documents > Virtual Machines)
- Copy the clone to additional Macs with Fusion as required NOTE: On the Mac with a new installation, open Server Admin and go to Settings > General tab to change the serial number
- Install your required Rosetta/PowerPC/10.6 compatible software
- Check the Mac OS X 10.6 Server Notes NOTE: Although drag and drop (between the Mac OS X virtual environment and your normal Mac/primary OS) is enabled in the virtual machine settings by default it is not supported with Mac OS X 10.6 Server but you can configure the virtual machine to have a shared folder with your primary OS - go to Fusion, Virtual Machine menu > Settings… > Sharing and add shared folder(s) as required e.g. use the dedicated Documents > '106SharedFolder' folder in your primary OS as per the preparation section above
VirtualBox
- Open VirtualBox
- Go to Machine menu > New
- Click on 'Expert Mode'
- Name your virtual machine e.g. 'Mac OS X 10.6 Server'
- Set 'Type' to 'Mac OS X'
- Set 'Version' to 'Mac OS X 10.6 Snow Leopard (64-bit)'
- Choose your required custom settings. We recommend:
- Memory Size > 4096MB (4GB)
- Hard Disk > 'Create a virtual hard disk now'
- Click 'Create'
- Set your virtual disk settings. We recommend:
- File Size > at least 20GB
- Hard disk file type > 'VDI (VirtualBox Disk Image)'
- Storage on physical hard disk > 'Dynamically allocated'
- Click 'Create'
- Select the new virtual OS on the left and click 'Settings' at the top
- Set your virtual OS settings. We recommend:
- Display > Screen > Video memory - the more memory assigned the higher the resolution available for the virtual environment e.g. set it to 128MB
- Audio > UNTICK 'Enable Audio' - according to the VirtualBox forums it is best that audio is disabled
- Shared Folders > add your dedicated shared folder e.g. in your Documents > '106SharedFolder' (as per the preparation section above)
- Click 'OK'
- Select your virtual OS on the left and click 'Start' at the top
- Click on the little 'Choose a virtual optical disk file…' yellow folder icon
- Locate your Mac OS X 10.6 Server install DVD ISO image file and 'Open' it
- Click 'Start'
- The virtual machine will reboot to the OS X Server install disc with lots of text on the screen - be patient until the installer language screen appears
- Follow the on screen instructions
- At the Install Mac OS X Server screen if the virtual hard disk is not present, go to Utilites menu > Disk Utility > select the virtual disk on the left > click 'Partition' on the right > name the drive something different to your main computer's hard disk e.g. '106 Server HD' > and partition the drive
- Quit Disk Utility
- At the Install Mac OS X Server screen, click 'Customize…' in the bottom left and select custom options as required, specifically tick 'Rosetta' and 'QuickTime 7'. Only tick 'Langauge Translations' or 'X11' if you specifically need them otherwise you are just wasting space. No need to tick 'Printer Support' as it's a virtual environment and if drivers are needed OS X will automatically download and install the latest driver versions as required.
- After the installation completes and the virtual machine reboots please be patient, especially with any black screens - everything is slightly slower in a virtual environment
- At the Welcome screen follow the on screen instructions NOTE: If 10.6 Server needs to be installed on multiple Macs using different serial numbers that you have no control over make a copy or clone of the virtual machine before entering the serial number:
- In the VirtualBox virtual OS window click the red circle in the top left and select 'Power off the machine' to force the Mac to shut down
- In the Finder go to the VirtualBox virtual machine folder (usually Macintosh HD > Users >your home directory > VirtualBox VMs)
- Copy/duplicate/archive the Mac OS X 10.6 Server virtual machine folder
- Copy this folder to the same place on additional Macs with VirtualBox as required (usually Macintosh HD > Users >your home directory > VirtualBox VMs)
- In the main VirtualBox window select the Mac OS X 10.6 Server virtual machine on the left (don't open it or start it)
- Go to Machine menu > Clone… and make a clone of the virtual machine
- Copy the clone to additional Macs with VirtualBox as required
- In the main VirtualBox window select the Mac OS X 10.6 Server virtual machine on the left and click 'Settings' > System > Motherboard
- Move 'Hard Disk' to the top of the 'Boot Order' list and UNTICK all other options
- Click 'Storage' and right click/control click on the Mac OS X 10.6 Server install DVD ISO image file in the 'Storage Tree' to select 'Remove Attachment'
- Click 'OK'
- Start up the Mac OS X 10.6 Server virtual machine again and complete the initial installation (and enter your serial number)
- Set up as a new server
- If you don't want to register at the registration page click inside the virtual machine and window and press (Apple+q) then click the 'Skip' button
- At the Administrator Account screen untick 'Enable administrators to log in remotely using SSH' and 'Enable administrators to manage this server remotely' and create an admin account
- At the Network screen select Ethernet on the left and on the right set 'Configure IPv4' to 'Using DHCP'
- At the Network Names screen set 'Primary DNS Name' to 'my106server.private' and 'Computer Name' to 'my106server' (use different, identifiable names if you are installing on multiple Macs e.g. 106server01.private / 106server01, then 106server02.private / 106server02, and so on… - these can be changed later if required)
- At the Users and Groups screen choose 'Configure Manually'
- At the Connect to a Directory Server screen untick 'Connect to a Directory Server'
- At the Directory Services screen untick 'Set up an Open Directory master'
- Click 'Setup' and Mac OS X Server will configure itself
- Now the Finder will appear and the Server Admin application will open NOTE: Under Settings >
- General tab you can change the serial number
- Network tab you can change the Computer Name and/or Local Hostname
- Quit Server Admin
- If you want to add the virtual optical drive back to the VM in the main VirtualBox window select the Mac OS X 10.6 Server virtual machine on the left and click 'Settings' > Storage and add Optical Disc to the 'Storage Tree' with the 'Leave Empty' option
- Click 'OK'
- Set your Finder > Preferences
- Move or delete the 'Mac OS X Server Next Steps.pdf' from the Desktop - you do not need to do any of this.
- Remove unneeded server administration tools icons from the Dock
- Go to Apple menu > Software Update and install all available updates (there will be quite a lot of updates and the 10.6.8 server update is over 1GB in size so they could take some time to download/install)
- Keep going to Apple menu > Software Update and installing all available updates until there are no more updates to install NOTE: If you are going to install 10.6 Server on multiple Macs and you have control over the serial numbers you can now make a copy or clone of the virtual machine and simply change the serial number on each installation:
- Select 'Shut Down' from the virtual machine Apple menu
- In the Finder go to the VirtualBox virtual machine folder (usually Macintosh HD > Users >your home directory > VirtualBox VMs)
- Copy/duplicate/archive the Mac OS X 10.6 Server virtual machine folder
- Copy this folder to the same place on additional Macs with VirtualBox as required (usually Macintosh HD > Users >your home directory > VirtualBox VMs)
- In the main VirtualBox window select the Mac OS X 10.6 Server virtual machine on the left (don't open it or start it)
- Go to Machine menu > Clone… and make a clone of the virtual machine
- Copy the clone to additional Macs with VirtualBox as required NOTE: On the Mac with a new installation, open Server Admin and go to Settings > General tab to change the serial number
- Install your required Rosetta/PowerPC/10.6 compatible software
- Check the Mac OS X 10.6 Server Notes NOTE: You cannot drag and drop between the Mac OS X virtual environment and your normal Mac/primary OS but you can configure the Virtual Machine to have a shared folder with your primary OS though - go to Settings > Shared Folders and add shared folder(s) as required e.g. use the dedicated Documents > '106SharedFolder' folder in your primary OS as per the preparation section above
Mac OS X 10.6 Server Notes
Security Notes
Mac OS X 10.6 is no longer supported with security updates so be sure to follow our recommendations for securing older operating systems, specifically:- Don't use Apple Safari as it is no longer updated and thus it is not secure - use a supported web browser e.g. Roccat or TenFourFox
- Don't use Apple Mail as it is no longer updated and thus it is not secure (unless you are running this virtual Mac specifically to run Eudora use a mail client in your primary OS instead)
- Don't install unsupported web plug-ins and disable old plugins:
- Go to 106 Server HD (or whatever you have named the virtual hard disk) > Library
- If there is no folder named 'Internet Plug-Ins (Disabled)', create a new folder named that
- Open the 'Internet Plug-Ins' folder and move all the items in it to the 'Internet Plug-Ins (Disabled)' folder NOTE: To move the files you will need to authenticate as an administrator of the computer.
- Restart the virtual machine (go to Apple menu > Restart)
General Notes
- As it is a server installation automatic login is off by default - you can turn it on in Apple menu > System Preferences > Accounts > Login Options > Automatic Login
- There are extra folders on the root of the hard disk titled 'Groups' and 'Shared Items' - this is normal, you don't need to worry about them, but do not delete them.
- There is an extra folder in Applications titled 'Server' - this is normal, you don't need to worry about it - it contains the server administrator software, but do not delete the folder/software.
Running 32-bit Applications
Article Keywords: Mac OS X OSX 106 107 108 109 1010 1011 macOS 1012 1013 1014 1015 Snow Leopard Lion Mountain Lion Mavericks Yosemite El Capitan Sierra High Sierra Mojave Catalina Rosetta PowerPC Power PC PPC apps applications software running cannot can not can't run open old legacy software new modern Mac Macintosh computer VM virtual machine virtualisation virtualising virtualization virtualizing OS operating system Parallels Desktop Fusion VirtualBox
This article is © MacStrategy » a trading name of Burning Helix. As an Amazon Associate, employee's of MacStrategy's holding company (Burning Helix sro) may earn from qualifying purchases. Apple, the Apple logo, and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
All proceeds go directly to MacStrategy / Burning Helix to help fund this web site.
All proceeds go directly to MacStrategy / Burning Helix to help fund this web site.
Go to this
web page
to donate to us.
Estimated reading time: 6 minutes
Docker Desktop for Mac is the Community version of Docker for Mac.You can download Docker Desktop for Mac from Docker Hub.
By downloading Docker Desktop, you agree to the terms of the Docker Software End User License Agreement and the Docker Data Processing Agreement. Call of duty black ops 2 mac free.
What to know before you install
Relationship to Docker Machine: Installing Docker Desktop on Mac does not affect machines you created with Docker Machine. You have the option to copy containers and images from your local default
machine (if one exists) to the Docker Desktop HyperKit VM. Whenyou are running Docker Desktop, you do not need Docker Machine nodes running locally (or anywhere else). With Docker Desktop, you have a new, nativevirtualization system running (HyperKit) which takes the place of theVirtualBox system.
System requirements
Your Mac must meet the following requirements to successfully install Docker Desktop:
Mac hardware must be a 2010 or a newer model, with Intel's hardware support for memory management unit (MMU) virtualization, including Extended Page Tables (EPT) and Unrestricted Mode. You can check to see if your machine has this support by running the following command in a terminal:
sysctl kern.hv_support
If your Mac supports the Hypervisor framework, the command prints
kern.hv_support: 1
.macOS must be version 10.14 or newer. That is, Mojave or Catalina. We recommend upgrading to the latest version of macOS.
If you experience any issues after upgrading your macOS to version 10.15, you must install the latest version of Docker Desktop to be compatible with this version of macOS.
Note: Docker supports Docker Desktop on the most recent versions of macOS. Docker Desktop currently supports macOS Mojave and macOS Catalina.
How to put microsoft office on mac. As new major versions of macOS are made generally available, Docker stops supporting the oldest version and support the newest version of macOS.
At least 4 GB of RAM.
VirtualBox prior to version 4.3.30 must not be installed as it is not compatible with Docker Desktop.
What's included in the installer
The Docker Desktop installation includes Docker Engine, Docker CLI client, Docker Compose, Notary, Kubernetes, and Credential Helper.
Install and run Docker Desktop on Mac
Apfs mac journaled. Double-click
Docker.dmg
to open the installer, then drag the Docker icon to the Applications folder. Best web browser mac os x.Double-click
Docker.app
in the Applications folder to start Docker. (In the example below, the Applications folder is in 'grid' view mode.)The Docker menu in the top status bar indicates that Docker Desktop is running, and accessible from a terminal. Canon 220 240v driver for windows 10.
If you've just installed the app, Docker Desktop launches the onboarding tutorial. The tutorial includes a simple exercise to build an example Docker image, run it as a container, push and save the image to Docker Hub.
Click the Docker menu () to seePreferences and other options.
Select About Docker to verify that you have the latest version.
Congratulations! You are now successfully running Docker Desktop.
If you would like to rerun the tutorial, go to the Docker Desktop menu and select Learn.
Uninstall Docker Desktop
To unistall Docker Desktop from your Mac:
- From the Docker menu, select Troubleshoot and then select Uninstall.
- Click Uninstall to confirm your selection.
Note: Uninstalling Docker Desktop will destroy Docker containers and images local to the machine and remove the files generated by the application.
Switch between Stable and Edge versions
Docker Desktop allows you to switch between Stable and Edge releases. However, you can only have one version of Docker Desktop installed at a time. Switching between Stable and Edge versions can destabilize your development environment, particularly in cases where you switch from a newer (Edge) channel to an older (Stable) channel.
For example, containers created with a newer Edge version of Docker Desktop maynot work after you switch back to Stable because they may have been createdusing Edge features that aren't in Stable yet. Keep this in mind asyou create and work with Edge containers, perhaps in the spirit of a playgroundspace where you are prepared to troubleshoot or start over.
Experimental features are turned on by default on Edge releases. However, when you switch from a Stable to an Edge release, you must turn on the experimental features flag to access experimental features. From the Docker Desktop menu, click Preferences > Command Line and then turn on the Enable experimental features toggle. Click Apply & Restart for the changes to take effect.
To safely switch between Edge and Stable versions, ensure you save images and export the containers you need, then uninstall the current version before installing another. For more information, see the section Save and Restore data below.
Save and restore data
You can use the following procedure to save and restore images and container data. For example, if you want to switch between Edge and Stable, or to reset your VM disk:
Use
docker save -o images.tar image1 [image2 .]
to save any images you want to keep. See save in the Docker Engine command line reference.Use
docker export -o myContainner1.tar container1
to export containers you want to keep. See export in the Docker Engine command line reference.Uninstall the current version of Docker Desktop and install a different version (Stable or Edge), or reset your VM disk.
Use
docker load -i images.tar
to reload previously saved images. See load in the Docker Engine.Use
docker import -i myContainer1.tar
to create a filesystem image corresponding to the previously exported containers. See import in the Docker Engine.
For information on how to back up and restore data volumes, see Backup, restore, or migrate data volumes.
Where to go next
- Getting started provides an overview of Docker Desktop on Mac, basic Docker command examples, how to get help or give feedback, and links to other topics about Docker Desktop on Mac.
- Troubleshooting describes common problems, workarounds, howto run and submit diagnostics, and submit issues.
- FAQs provide answers to frequently asked questions.
- Release notes lists component updates, new features, andimprovements associated with Stable releases. For information about Edge releases, seeEdge release notes.
- Get started with Docker provides a general Docker tutorial.